Analysis Of Misalignment By Manufacturers Of Fully Automatic Laminating Machines

What is the reason for the problem of misalignment in the fully automatic lamination machine? Below, the manufacturer of the fully automatic laminating machine will tell you about the misalignment issue.

The die-cutting component is the core component of a fully automatic laminating machine, and the die-cutting board and die-cutting board are the basic components. In order to ensure high-quality die-cutting, the production of die-cutting boards is very important. Among them, the opening points and adhesive sponge strips can reflect the production level. The opening joint point is a certain width of Lekai adhesive at the edge of the die-cutting blade, which connects the cardboard box and waste material together during the die-cutting process, and will not scatter during the die-cutting process. Originally, most operators used their own grinding tools to open the connection points, which had many drawbacks, such as different sizes of the connection points and deformation of the die cutting edge when opening them. At present, many manufacturers have adopted specialized open contact devices. Taking the bottle opener used by Sichuan Wuniu Company as an example, its working principle is to use different thicknesses of grinding wheels as connection points on the die-cutting knife based on the different thicknesses of paper wine packaging. In this way, the size of the connection points is uniform, without damaging the knife, and the depth is moderate. Generally, 0.3mm thick grinding wheels are used for 200-250g/m2 paper, 0.4mm grinding wheels are used for 250-350g/m2 paper, and 0.8mm grinding wheels are used for cardboard or corrugated cardboard. Regardless of the size of the connection point, it should be opened in a concealed area of the packaging box to avoid affecting its appearance. The above is an analysis by the manufacturer of fully automatic laminating machines on the issue of misalignment.